 Non-ferrous metals
Thermoplastics
Elastomers
Shore hardness grades. According to DIN 53505 A
-----------------------------------------------------------------------------
| Non-ferrous metals |
| CW614N |
- Brass (Cu Zn39 Pb3) |
| CW617N |
- Brass (Cu Zn40 Pb2) |
| LM |
- Aluminium (ALMg Sil) |
| |
|
| Thermoplastics |
| ABS |
- Acrylonitrile butadiene styrene |
| HD-PE |
- High pressure polyethylene |
| ND-PE |
- Low pressure polyethylene |
| PA |
- Polyamide |
| PE |
- Polyethylene |
| POM |
- Polyoxymethylene |
| PP |
- Polypropylene |
| PSU |
- Polysulphone |
| PIFE |
- Polytetrafluoroethylene (Teflon) |
| PVC |
- Polyvinyl chloride |
| SAN |
- Styrene acrylonitirile |
| THERMOFLEX |
- Thermoplastic polyester |
| |
|
| Elastomers |
| CR |
- Polychloroprene (Neoprene) |
| EPDM |
- Ethylene-propylene-terpolymer |
| EWP 210 |
- Rubber-bound plastic fibres (surface graphitized on one or both sides) |
| FPM |
- Vinylidene fluoride hexaflouropropylene lcopolymer (Viton) |
| NBR |
- Butadiene/acrylonitrile copolymer (Perbutane) |
| NR |
- Natural rubber (food product resistant) |
| PU |
- Polyurethane (Vulkollan) |
| SBR |
- Styrene butadiene rubber |
| |
|
| Shore hardness grades. According to DIN 53505 A |
| 28° up to 38° |
- very soft |
| 40° up to 50° |
- soft |
| 52° up to 66° |
- moderately soft |
| 68° up to 78° |
- moderately hard |
| 80° up to 90° |
- hard |
| 92° up to 100° |
- very hard |
|
